Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kato, Tomoaki; Yamagishi, Isao
JAEA-Technology 2023-018, 53 Pages, 2023/11
JAEA-Technology-2023-018.pdf:2.6MB
In the decommissioning of Fukushima Daiichi Nuclear Power Station, radioactive carbonate slurry waste was generated using the Advanced Liquid Processing System (ALPS) pretreatment and temporarily stored in a high integrity container (HIC). In 2015, overflow of supernatant from HIC estimate as bubble retention in the carbonate slurry was discovered, increasing the need for a safety assessment of the carbonate slurry stored the HIC (HIC slurry). In this study, a carbonate slurry (simulated slurry) was prepared according to the Mg/Ca mass ratio in the ALPS inlet water of the HIC slurry which overflew the HIC. The effects of reaction time during the pretreatment process, suspended solids concentration (SS concentration), and settling time on the particle composition, morphology and rheological properties of the slurry were investigated. Evaluating the effect of reaction time and concentration process on chemical properties in slurry production, the effect of the reaction time was not confirmed in the simulated slurry that had undergone the concentration process, and slurry prepared at SS concentration of 150 g/L was composed of formless particles have a particle diameter of 0.4 
m or less. We also investigate the effect of SS concentration on sedimentability, decrease in SS concentration by dilution with processing solution contributed to an increase in the initial slurry settling velocity. Furthermore, two different flow characteristics were observed depending on the settling time, suggesting that the slurry at the initial settling time has non-Bingham flow properties, whereas it changes to Bingham flow properties as the settling time becomes longer. In addition, yield stress was increased with settling time, and this yield stress was found to be exponentially proportional to the density of the slurry. These results provide knowledge to estimate the current state of HIC slurry and are expected to contribute to the safety assessment.
Horita, Takuma; Yamagishi, Isao; Nagaishi, Ryuji; Kashiwaya, Ryunosuke*
JAEA-Technology 2021-012, 34 Pages, 2021/07
JAEA-Technology-2021-012.pdf:2.1MBJAEA-Technology-2021-012(errata).pdf:0.18MB
Waste mainly consisting of carbonate precipitates (carbonate slurry) from the Advanced Liquid Processing System (ALPS) and the improved ALPS at the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Holdings, Inc. have been storing in the High Integrity Container (HIC). The supernatant solution of carbonate slurry contained in some of HICs were overflowed in April of 2015. The all of level of liquid in the HICs were investigated; however, almost of the HICs were under the level of overflow. The mechanism of overflow suggested to be depending on the difference of the properties of the carbonate slurry such as the retention/release characteristics of the bubbles. Therefore, in order to clarify the mechanism of leakage, the repeatability experiment was carried out by using simulated carbonate slurry. The simulated carbonate slurry was perpetrated by using the same cross-flow filter system of the actual ALPS. Moreover, the preparative conditions for the simulated carbonate slurry were the same as Mg/Ca concentration ratio in inlet water of the ALPS (raw water) and the ALPS operating conditions. The chemical characteristics of simulated carbonate slurries were revealed by ICP-AES, pH meter, etc. The density of the settled slurry layer tended to increase depending on the calcium concentration in the raw water. The bubble injection test was conducted in order to investigate the bubble retention/release behavior in the simulated carbonate slurry layer. The simulated carbonate slurry with high settling density, which was generated by high calcium concentration solution was revealed to retain the injected bubbles. Since the ratio of concentration calcium and magnesium during the carbonate slurry generation is assumed to affect the retention of bubbles in the slurry layer, the information on the composition of raw water is one of important factor for overflow of HICs.
-ray irradiationMotooka, Takafumi; Nagaishi, Ryuji; Yamagishi, Isao
QST-M-2; QST Takasaki Annual Report 2015, P. 95, 2017/03
We conducted ray irradiation test using simulated carbonate slurry to investigate the cause of stagnant water over the high integrity container (HIC). This test was performed at Co-60 irradiation facility in Takasaki Advanced Radiation Research Institute. We observed a rise in water level, air bubbles in the slurry, a supernatant when the carbonate slurry with 95 g/L density was irradiated by ray at a dose rate of 8.5 kGy/h. The cause of the rise in water level was regarded as the volume expansion by the gas retention of the carbonate slurry. It was suggested that the cause of stagnant water over the high integrity container might be the volume expansion by the gas retention.
Garc
a-Lodeiro, I.*; Lebon, R.*; Mahoney, D.*; Zhang, B.*; Irisawa, Keita; Osugi, Takeshi; Nakazawa, Osamu; Kinoshita, Hajime*
no journal, ,
Yamagishi, Isao; Motooka, Takafumi
no journal, ,
Highly radioactive wastes such as carbonate slurry and zeolite are generated from the contaminated water treatment system at Fukushima Daiichi Nuclear Power Station. We have studied radiolytic gas generation in wet wastes for their safe storage. Carbonate slurry or wet zeolite as a simulated waste was irradiated by -ray. Radiolytic gas generation resulted in the slurry expansion and supernatant separation from the slurry. The supernatant was observed during irradiation of the zeolite immersed fully in seawater but not in case of the partial immersion.
